Pavarini Insurance is a licensed insurance producer and is compensated when a bond is placed through this site. This page is general information, not legal, tax or fiduciary advice, and it is not a substitute for reading your plan document or contract or for advice from your own counsel. Figures shown are current as of the date on this page.
A contractor pulling a permit in a suburb outside Chicago, Cleveland or Orlando runs into a requirement that does not exist in most of the country: the municipality wants its own contractor license or registration, and that registration needs a surety bond payable to the municipality. The amount is usually between $5,000 and $25,000, the term usually runs with the registration year, and the bond is good in that one jurisdiction and nowhere else.
These are municipal contractor bonds, also called contractor registration bonds, contractor license bonds, contractor compliance bonds or permit bonds depending on the ordinance. They exist because building departments want a way to recover the cost of a job left unfinished, a right of way left torn up, or a permit fee left unpaid without suing a contractor who has moved on. The bond gives the city a surety to look to.
This section explains how they work, how they differ from a state contractor license bond, what a claim looks like, how renewal works, and then lists the municipalities we have records for in the three states where this requirement is most common: Illinois, Ohio and Florida.
The short version#
What to know before you apply:
- Who requires it. The municipality or county, by ordinance, as a condition of contractor registration or a permit. Not the state.
- One bond per jurisdiction. A Des Plaines bond is not good in Skokie. Contractors working across a metro area carry several.
- Amount. Set by the ordinance. Most fall between $5,000 and $25,000. A few cities go higher for general contractors or demolition.
- Term and renewal. Many registrations run on the calendar year and renew with the registration. Others follow the permit or a two year cycle. The ordinance or the building department confirms yours. Renewal guide
- Underwriting. Fast. Most are issued the same day on the owner's credit, without financial statements.
Why a city can require a bond when the state already licensed you#
Contractor licensing in the United States splits by state. Some states license general contractors statewide and require a state bond. Illinois does not license general contractors at the state level at all, which is why its municipalities built their own registration systems and why the Chicago suburbs have so many of these bonds. Ohio licenses certain trades statewide but leaves general contractor registration to cities and counties. Florida licenses contractors statewide through the DBPR, and still lets counties and cities require a local bond for contractors working under a local competency card or a city registration.
The authority comes from the municipality's police power over construction within its borders, usually exercised through the building code ordinance. The ordinance says who must register, what the registration costs, and that the applicant shall furnish a bond in a stated amount, conditioned on compliance with the code and payment of fees, fines and the cost of repairing public property. The state license, where one exists, does not satisfy that. They stack.
What the bond covers#
Read the condition on the bond form, because it varies, but the common conditions are:
- Code compliance. The contractor will comply with the building code and the ordinances of the municipality. A code violation that the city has to correct is a claim.
- Public property. Streets, sidewalks, curbs, parkways and utilities damaged or opened during the work will be restored. This is the most common actual claim, especially on sewer, excavation and right of way bonds.
- Fees and fines. Permit fees, inspection fees, re-inspection fees and fines assessed under the ordinance will be paid.
- Completion, in some ordinances. A few municipalities condition the bond on finishing permitted work or paying the cost of making an abandoned job safe.
What it does not cover is the homeowner's contract dispute, unpaid subcontractors, or the contractor's own liability. Those belong to a performance bond, a payment bond and a liability policy. A homeowner asking whether the contractor is "licensed and bonded" in one of these towns is usually hearing about this bond, and it is worth knowing how little of their risk it actually reaches. The Homeowner Protection Bond section covers what a homeowner can require instead.
How amounts and categories work#
Ordinances set the amount, and most use a single figure for all registered contractors. The most common figures are $10,000, $20,000 and $25,000. Some municipalities tier by category: a higher bond for general contractors, demolition, excavation, sewer or roofing, and a lower one for specialty trades or subcontractors. A handful set $50,000 for demolition or general trades. A few small villages are at $3,000 or $5,000.
The record for each municipality on this site shows the amount from the ordinance as it stood when the record was last checked. Amounts do change by ordinance amendment, so if the building department quotes a different figure, the department is right and we would like to hear about it.
Who the bond runs to and what happens on a claim#
The obligee is the municipality or county. When the city believes the bond has been breached, it makes demand on the surety, the surety investigates, and if the claim is valid the surety pays up to the bond amount and then looks to the contractor for reimbursement under the indemnity agreement signed at application. A municipal contractor bond is not insurance for the contractor. It is a guarantee to the city with the contractor's credit behind it.
In practice claims are uncommon and small, which is why underwriting is fast and premiums are modest. The two situations that produce them are a torn up parkway or street cut that the contractor does not restore, and a contractor who leaves town with permits open and fines unpaid.
Working in several municipalities#
There is no reciprocity. Each municipality wants its own bond, in its own amount, on its own form, running to itself. A contractor doing business across the Chicago suburbs or the Cleveland suburbs may carry ten or more. The premiums are small individually, and most sureties will write them quickly once the contractor is on file, but the renewal dates need managing. Keep a list of every municipality, its bond amount, its registration year and its renewal date, and do the renewals together.
In this section
Common questions
What is a municipal contractor bond?
A surety bond a city, village, township or county requires from a contractor as a condition of its contractor registration or a building permit. It runs to the municipality and is conditioned on compliance with the building code, restoration of public property, and payment of fees and fines. Amounts are set by local ordinance and usually fall between $5,000 and $25,000.
I have a state contractor license. Do I still need a city bond?
If the city's ordinance requires one, yes. Municipal registration requirements are separate from state licensing and the two stack. In Illinois there is no state general contractor license, so the municipal registration and bond are the only ones.
Is one bond good in every town?
No. Each municipality requires its own bond, in its own amount, payable to itself. A contractor working in several towns carries several bonds.
How much does a municipal contractor bond cost?
A small percentage of the bond amount, set by the surety from the owner's credit. Most are issued the same day without financial statements. The application for each municipality's bond shows the premium before anything is bound.
Does the bond protect my customers?
Only indirectly. It protects the municipality against code violations, damage to public property and unpaid fees. A homeowner who wants protection on their own project needs a performance and payment bond on that contract, which is a different product.
When does the bond renew?
With the registration, in most ordinances. Many municipal contractor registrations run on the calendar year, so the bond renews for the new year along with the registration. Others follow a two year cycle or the permit. Confirm the term with the building department, and see the renewal guide in this section.

